by | Mar 1, 2013 | Home Improvement

Search

Latest Post

Categories

Archive

Radiators are a very popular fixture for heating and cooling the home, because they are reliable, customizable and can increase or decrease the temperature in a room quickly. If your radiator does not seem to be getting as hot as it used to, you probably need to hire Temple Hills heating contractors. There are a few things that Temple Hills heating contractors will do to boost comfort in the home and when you know what these are, you can take responsibility of your radiators throughout the year.

Clean Them

You may not realize it but radiators need cleaning just like any other kind of heating device. The more you clean a radiator, the less often you will need to hire Temple Hills heating contractors. Lint, dust and dirt can prevent the heat from moving around the room as it should, so take a cloth and wipe debris away. If some dirt has accumulated on the surface you might want to take a bristle brush to dislodge stubborn marks. After doing this the efficiency of the radiator will increase. You should do this once a week for the best results.

Bleed Them

Temple Hills heating contractors will bleed the radiators to make them work better and it is worth doing this before winter comes, otherwise you may be wearing extra layers to keep warm! So, what exactly is involved in bleeding a radiator? Well, air bubbles can get trapped in the piping of a radiator and this prevents the radiator from heating up properly. The heating contractor will release this build-up of air by turning the valves with a wrench. Radiators only need to be bled once a year and you will notice an immediate change in temperature after doing this. Check to see if your radiator has a self-bleeding air vent on it because if so, you can let them vent from time-to-time.

Flush Them

If you are the ‘handyman’ of the house you may want to flush the radiator yourself but if not, you should hire Temple Hills heating contractors. To flush the radiator you should locate the boiler drain outlet and attach a hose to it. Find the radiator with the highest valve and leave the system drain for about 30 minutes. Once 30 minutes has passed the water inlet valve should be turned on and you should inspect the water to make sure it is clean. If so, you can consider the job to be done and if not, you may need professional assistance.

 
You should not attempt to repair your radiators if you are inexperienced at do-it-yourself projects. To hire experienced heating contractors from Besche Company, visit Beschecompany.com

 

  

Similar Posts